2020_SS1_Bis2a_Facciotti_Reading_08 - Biology

We are searching data for your request:

Forums and discussions:

Manuals and reference books:

Data from registers:

Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Learning Objectives Associated with 2020_SS1_Bis2a_Facciotti_Reading_08

Understand how to use the equation ΔG = ΔH - TΔS and explain what each term represents.
Interpret reaction coordinate diagrams and associate changes in Gibbs enthalpy and activation energy with relative rates of reactions, equilibrium conditions, and whether a reaction is endergonic or exergonic.
Interpret reaction coordinate diagrams showing either or both catalyzed and uncatalyzed reaction coordinates and identify respective activation energy barriers and relate these to the forward and reverse rates of reaction.
Describe the relationship between free energy and chemical equilibrium using the equation ∆G° = -RTlnKeq, explicitly invoking appropriate “initial” and “final” states (as is done in an Energy Story).
Interpret a biochemical transformation and predict whether or not the reaction is spontaneous by using a Gibbs enthalpy (energy) reaction coordinate diagram.
Describe the concept of equilibrium in the context of reaction coordinate diagrams.
Describe mechanisms used by enzymes to lower the activation energy and increase rates of reaction.
Draw a rough sketch of an enzyme including its active site and other sites in the enzyme that might impact its function, such as an inhibitor binding site.
Hypothesize how binding of small molecules to one or more binding pockets can lead to changes in protein function (i.e. competitive inhibition and/or allostery).
Describe in general terms the functional link between cofactors, coenzymes, and their associated proteins.
Predict whether two reactions can be theoretically productively coupled by interpreting tables of standard Gibbs enthalpy.

Endergonic and exergonic reactions

Any system of molecules that undergoes a physical transformation/reorganization (aka. If we examine a single isolated reaction, in which unique reactants convert into unique products the Gibbs energy of the system will be dependent on several factors, key among which are (a) the internal energy and entropy differences associated with the molecular rearrangements and (b) the degree to which the reaction is out-of-equilibrium.

If, for the sake of simplicity we begin by considering only the contribution of the molecular transformations in the system on ∆G, we conclude that reactions with ∆G < 0, the products of the reaction have less Gibbs energy than the reactants. Since ∆G is the difference between the enthalpy and temperature-scaled entropy changes in a reaction, a net negative ∆G can arise in through changes largely of enthalpy, entropy or most often both. The left panel of Figure 1 below shows a common graphical representation of an exergonic reaction. This graphis calleda reaction coordinate diagram. It plots Gibbs energy on the y-axis, and the x-axis in arbitrary units shows the progress of a reaction. With an exergonic reaction, the figure on the left shows two key things: (1) the difference between the free energy of the reactants and products is negative and (2) the progress of the reaction requires some input of free energy (shown as an energy "hill" or barrier). This graph does not tell us how the energy in the systemredistributed, only that the difference between enthalpy and temperature-scaled entropy is negative. Exergonicreactionsare saidto occur spontaneously. Understanding which chemical reactions are spontaneous is useful for biologists who are trying to understand whether a reaction is likely to "go" or not.

It is important to note that the term "spontaneous"—in thermodynamics—implies nothing about how fast the reaction proceeds. The change in free energy only describes the difference between beginning and end states, NOT how fast that transition takes place. This is contrary to the everyday use of thetermwhich usually carries the implicit understanding that something happens quickly. As an example, the oxidation/rusting of iron is a spontaneous reaction. However, an iron nail exposed to air does not rust instantly—it may take years.

A chemical reaction with a positive ∆G means that the products of the reaction have a higher free energy than the reactants (see the right panel of Figure 1). These chemical reactionsare calledendergonic reactions, and they are NOT spontaneous. An endergonic reaction will not take place on its own without transferring energy into the reaction or increase of entropy somewhere else.

Figure 1. Reaction coordinate diagrams of exergonic and endergonic reactions. Exergonic and endergonic reactionsare characterizedby changes in Gibbs energy. In the equilibrium state of an exergonic reaction, the Gibbs energy of the products is lower than that of the reactants. Meanwhile, the equilibrium state of an endergonic reactionin,the Gibbs energy of the products is higher than that of the reactants. Attribution:Marc T. Facciotti (own work)

The building of complex molecules, such as sugars, from simpler ones is an anabolic process and is endergonic.On the other hand, thecatabolic process, such as the breaking down of sugar into simpler molecules, is exergonic. Like the example of rust above, while the breakdown of biomolecules isgenerallyspontaneous, these reactions don’t needto occurinstantaneously(quickly). Remember, the terms endergonic and exergonic only refer to the difference in Gibbs energy between the products and reactants; they don't tell you about the rate of the reaction (how fast it happens).Ratewill be discussedin later sections.

An important concept in the study of metabolism and energy is that of chemical equilibrium. Most chemical reactions are reversible. They can proceed in both directions, often transferring energy into their environment in one direction and transferring energy infromthe environment in the other direction. The same is true for the chemical reactions involved in cell metabolism, such as the breaking down and building up of proteins into and from individual amino acids, respectively. Reactants within a closed system will undergo chemical reactions in both directions until a state of equilibriumis reached. Equilibrium in a chemical reaction is the state in which both reactants and products are present in concentrations that have no further tendency to change with time. Usually, this state results when the forward reaction proceeds at the same rate as the reverse reaction. NOTE THIS LAST STATEMENT! Equilibrium means that the relative concentrations of reactants and products are not changing in time, BUT it does NOT mean that there is no interconversion between substrates and products—it just means that when the reactant(s)are convertedto product(s) that product(s)are convertedto reactant(s) at an equal rate (see Figure 2). The state of equilibrium is also one of the lowestpossiblefree energy states for the reaction and is a state of maximal entropy.

If a reactionis keptor started far out of equilibrium this state of the system also contributes to the overall Gibbs energy of a reaction. Either a rebalancing of substrate or product concentrations (by adding or removing substrate or product) or a positive change in free energy, typically bythe transfer ofenergy from outside the reaction, can to move a reaction to an out-of-equilibrium state. Note that in a living cell, most chemical reactions do not reach a state of equilibrium—this would require that they reach their lowest free energy state, a statethatis almost by definition incompatible with life.Energy is therefore requiredto keep biological reactions out of their equilibrium state. In this way, living organisms are in a constant, energy-requiring, uphill battle against equilibrium and entropy. This also means that the Gibbs energy of most biological reactions as they occur in the cell must also include a contribution from this out-of-equilibrium state. The Gibbs energy of these reactions, therefore, is often different from that reported under standard conditions.

Figure 2. At equilibrium, do not think of a static, unchanging system. Instead, picture molecules moving in equal amounts from one area to another. Here, at equilibrium, molecules are still moving from left to right and right to left. The net movement, however, is equal. There will still be about 15 molecules in each side of this flask once it reaches equilibrium. Source: https://courses.candelalearning.com/...apter/entropy/

Catalysts

For a chemical reaction to happen, the reactants must first find one another in space. Chemicals in solution don't "plan" these collisions; they happen at random. In fact, most times, it's even more complicated. Not only do the reactants need to run into one another, but they also need to come into contact in a specific orientation. If reactants are very dilute, the rate of the reaction will be slow—collisions will happen infrequently. Increasing the concentrations will increase the rate of productive collisions. Another way to change the rate of reaction is to increase the rate of collisions by increasing the rate at which the reactants explore the reaction space—by increasing the velocity of the molecules or their kinetic energy. This canbe accomplishedby transferring heat into the system or raising the temperature. Those two strategies are often suitable for increasing the rates of chemical reactions that happen in a tube. However, in the cell, transferring heat may not be practical, as it may damage cellular components and lead to death. Cells sometimes use mechanisms to increase concentrations of reactants (we'll see some examples below), but this is rarely enough to drive reaction rates in a biologically relevant regime. This is where catalysts come in.

A catalyst is something that helps increase the rate of a chemical reaction undergoing no change itself. You can think of a catalyst as a chemical change agent.

The most important catalysts in biologyare calledenzymes. An enzyme is a protein catalyst. Other cellular catalysts include molecules called ribozymes. A ribozyme is a catalyst composed of a ribonucleic acid (RNA). Both willbe discussedin more detail later in the course. Like all catalysts, enzymes work by lowering the level of energy that needs tobe transferredinto a chemical reaction to make it happen. A chemical reaction’s activation energy is the “threshold” level of energy needed to start the reaction.

Figure 1. Enzymes and other catalysts decrease the activation energy required to start a given chemical reaction. Without an enzyme (left), the energy input needed for a reaction to begin is high. With the help of an enzyme (right), la reaction needs less energytobegin. Attribution:Marc T. Facciotti (original work)

In the figure above, What do you think the units are on the x-axis? Time would be one guess. However, if you compare the figures, it appears that the products are formed at the same time whether the activation energy barrier is high or low. Wasn't the point of this figure to illustrate that reactions with high activation energy barriers are slower than those with low activation energy barriers? What's going on?

Enzymes Section Overview

Enzymes are biological catalysts that speed up chemical reactions by lowering the activation energy. Enzymes are proteins comprising one or more polypeptide chains. Enzymes have an active site that provides a unique chemical environment made up of certain amino acid R groups (residues).

This unique environment is well suited

to convert particular chemical reactants for that enzyme, called substrates, into unstable intermediates, called transition states.

Enzymes and substrates are thought

to bind with an induced fit

which means that

enzymes and substrates undergo slight conformational adjustments upon substrate contact, leading to binding. Enzymes bind to substrates and catalyze reactions in four different ways: bringing substrates together in an optimal orientation, compromising the

bond

structures of substrates so that bonds can

be more easily broken

, providing optimal environmental conditions for a reaction to occur, or taking part directly in their chemical reaction by forming transient covalent bonds with the substrates.

Enzyme action must

be regulated

so that, in a

given

cell at a

given

time, the desired reactions are being catalyzed and the undesired reactions are not. Enzymes

are regulated

by cellular conditions, such as temperature and pH.

They are also regulated

through their location within a cell, sometimes being compartmentalized so

that

they can only catalyze reactions under certain circumstances. Inhibition and activation of enzymes via other molecules are other important ways that enzymes

are regulated

. Inhibitors can act competitively, noncompetitively, or allosterically; noncompetitive inhibitors are usually allosteric. Activators can also enhance the function of enzymes allosterically. The most common method by which cells regulate the enzymes in metabolic pathways is through feedback inhibition. During feedback inhibition, the products of a metabolic pathway serve as inhibitors (usually allosteric) of one or more of the enzymes (usually the first committed enzyme of the pathway) involved in the pathway that produces them.

Enzymes

A substance that helps a chemical reaction to occur is a catalyst, and the special molecules thatcatalyzebiochemical reactionsare calledenzymes. Almost all enzymes are proteins, made up of chains of amino acids, and they perform the critical task of lowering the activation energies of chemical reactions inside the cell. Enzymes do this by binding to the reactant molecules and holding them in such a way as to make the chemical bond-breaking and bond-forming processes take place more readily. It is important to remember that enzymes don’t change the ∆G of a reaction. They don’t change whether a reaction is exergonic (spontaneous) or endergonic (not spontaneous). This is because they don’t change the free energy of the reactants or products. They only reduce the activation energy required to reach the transition state.

Figure 1. Enzymes lower the activation energy of the reaction but do not change the free energy of the reaction. Here, the solid line in the graph shows the energy required for reactants to turn into products without a catalyst. The dotted line shows the energy required using a catalyst. This figure should say Gibbs Free Energy on the Y-axis and instead of noting deltaH should have deltaG. Attribution:Marc T. Facciotti (own work)

Enzyme active site and substrate specificity

The chemical reactants to which an enzyme binds are the enzyme’s substrates. There may be one or more substrates, depending on the particular chemical reaction. In some reactions, asingle-reactantsubstrateis brokendown into multiple products. In others, two substrates may come together to create one larger molecule. Two reactants might also enter a reaction, both becomechanged,and leave the reaction as two products. The location within the enzyme where the substrate bindsis calledthe enzyme’s active site. The active site is where the “action” happens, so to speak. Since enzymes are proteins, thereis a unique combination ofamino acid residues (also called sidechains,or R groups) within the active site. Each amino acid side chainis characterizedby different properties.Amino acids can be classifiedas large or small, weakly acidic or basic, hydrophilic or hydrophobic, positively or negatively charged, or neutral. The unique combination of amino acids (their positions, sequences, structures, and properties) creates a very specific chemical environment within the active site.This specific environment is suitedto bind, albeit briefly, to a specific chemical substrate (or substrates).Due tothis jigsaw-puzzle-like match between an enzyme and its substrates (which adapts to find the best fit between the transition state and the active site),enzymes are knownfor their specificity. The “best fit” between an enzyme and its substrates results from their respective shapes and the chemical complementarity of the functional groups on each binding partner.

Figure 2. This is an enzyme with two different substrates bound in the active site.The enzymes are representedas blobs, except for the activesite,which shows the three R-groups of each of the three amino acids in the active site. These R groups are interacting with the substrates through hydrogen bonding (represented as dashed lines).

At this point in the class, you should be familiar with all thetypes ofbondsas well asthe chemical characteristics of all the functional groups. For example, the R group of R180 in the enzyme depicted above is the amino acid Arginine (abbreviated as R) and has an R group that comprises several amino functional groups. Amino functional groups containanitrogen (N) and hydrogen (H) atoms. Nitrogen is more electronegative than hydrogen, so the covalent bond between N-H is a polar covalent bond. The hydrogen atoms in this bond will have a positive dipole moment, and the nitrogen atom will have a negative dipole moment. This allows amino groups to form hydrogen bonds with other polar compounds. Likewise, the backbone carbonyl oxygens of valine (V) 81 and glycine (G) 121 the backbone amino hydrogen of V81are depictedengaged in hydrogen bonds with the small molecule substrate.

Possible NB Discussion Point: How your body breaks down caffeine

When you drink coffee or other caffeinated beverages like some sodas, you are consuming a molecule called caffeine! Caffeine over time gets metabolized (broken down) via a set of very related "CYP (Cytochrome P450)" enzymes to yield the three products shown in the figure below (Source: Wikipedia). To simplify slightly, you can interpret one arrow to represent a reaction catalyzed by one of the related CYP enzymes to yield paraxanthine, theobromine, or theophylline... all of which themselves get recognized by other enzymes that will further break them down and so on and so forth. Take a moment to examine the four structures below; the general structure should look vaguely familiar to you. Compare the reactant and the three products -- what are the noteworthy functional groups and properties of these molecules? What do you predict to be the key features of the active sites for the enzymes that break down these four molecules? If you were to design an enzyme that would break down caffeine AND theophylline only, how would you design your active site?

Exercise

Look to see which atoms in Figure 2 (

above) are involved

in the hydrogen bonds between the amino acid R groups and the substrate. You will need to

be able to

identify these on your own; hydrogen bonds may not

be drawn

in for you on the test.

If you changed the pH of the solution that

this enzyme is located

in, would the enzyme still be able to form hydrogen bonds with the substrate?

Which substrate (the left or right one) do you think is more stable in the active site? Why? How?

Figure 3. This is a depiction of an enzyme active site.Only the amino acids in the active site are drawn. The substrate is sitting directly in the center.
Source: created byMarc T. Facciotti (original work)

Exercise

First, identify thetype ofmacromolecule in Figure 3. Second, draw in and label theappropriateinteractions between the R groups and the substrate. Explain how these interactions might change if the pH of the solutionchanged.

Real-LifeConnection

A new way of visualizing diseases in the body.

Structural instability of enzymes

The fact thatactive sites are so well suited to provide specific environmental conditions also means that they are subject to influences by the local environment.It is true that increasingthe environmental temperaturegenerallyincreases reaction rates, enzyme-catalyzed or otherwise. However, increasing or decreasing the temperature outside of an optimal range can affect chemical bonds within the active site in such a way that they are less well suited to bind substrates. High temperatures will eventually cause enzymes, like other biological molecules, to denature, a process that changes the natural properties of a substance. Likewise, the pH of the local environment can also affect enzyme function. Active site amino acid residues have their own acidic or basic propertiesthat areoptimal for catalysis. These residues are sensitive to changes in pH that can impair the way substrate molecules bind.Enzymes are suitedto function best within a certain pH range, and, as with temperature, extreme pH values (acidic or basic) of the environment can cause enzymes to denature.

Figure 4. Enzymes have an optimal pH. The pH at which the enzyme is most active will be the pH where the active site R groups are protonated/deprotonated such that the substrate can enter the active site and the initial step in the reaction can begin. Some enzymes require a very low pH (acidic) to becompletelyactive. In the human body, these enzymes are most likelylocatedin the lower stomach, orlocatedin lysosomes (a cellular organelle used to digest large compounds inside the cell).
Source: http://biowiki.ucdavis.edu/Biochemis..._pH_Inhibition

The process where enzymes denature usually starts with the unwinding of the tertiary structure through destabilization of the bonds holding the tertiary structure together.Hydrogen bonds, ionic bonds, and covalent bonds (disulfide bridges and peptide bonds) can all be disrupted by large changes intemperate and pH. Using the chart of enzyme activity and temperature below, make an energy story for the red enzyme. Explain what mightbe happeningfrom 37 °C to 95 °C.

Figure 5. Enzymes have an optimal temperature. The temperature at which the enzyme is most active will usually be the temperature where the structure of the enzyme is stable or uncompromised. Some enzymes require a specific temperature to remain active and not denature. Source: http://academic.brooklyn.cuny.edu/bi...ge/enz_act.htm

Induced fit and enzyme function

For many years, scientists thoughtthatenzyme-substrate binding took place in a simple “lock-and-key” fashion. This model asserted that the enzyme and substrate fit together perfectly in one instantaneous step. However, current research supports a more refined view called induced fit. The induced-fit model expands upon the lock-and-key model by describing a more dynamic interaction between enzyme and substrate. As the enzyme and substrate come together, their interaction causes a mild shift in the enzyme’s structure that confirms a more productive binding arrangement between the enzyme and the transition state of the substrate. This energetically favorable binding maximizes the enzyme’s ability to catalyze its reaction.

When an enzyme binds its substrate, an enzyme-substrate complexis formed. This complex lowers the activation energy of the reaction and promotes its rapid progression in one of many ways. On a basic level, enzymes promote chemical reactions that involvemore thanone substrate by bringing the substrates together in an optimal orientation. Theappropriateregion (atoms and bonds) of one moleculeis juxtaposedto theappropriateregion of the other molecule with which it must react. Another way in which enzymes promote the reaction of their substrates is by creating an energetically favorable environment within the active site for the reaction to occur. Certain chemical reactions might proceed best in a slightly acidic or nonpolar environment. The chemical properties that emerge from the particular arrangement of amino acid residues within an active site create the energetically favorable environment for an enzyme’s specific substrates to react.

The activation energy required for many reactions includes the energy involved in slightly contorting chemical bonds sothatthey can more easily react. Enzymatic action can aid this process. The enzyme-substrate complex can lower the activation energy by contorting substrate molecules in such a way as to facilitate bond breaking. Finally, enzymes can also lower activation energies by taking part in the chemical reaction itself. The amino acid residues can provide certain ions or chemical groups thatactuallyform covalent bonds with substrate molecules as a necessary step of the reaction process. In these cases, it is important to remember that the enzyme will always return to its original state at the completion of the reaction. One of the hallmark properties of enzymes is that they remain ultimately unchanged by the reactions they catalyze. Afteran enzyme is donecatalyzing a reaction, it releases its product(s).

Figure 6. According to the induced-fit model, both enzyme and substrate undergo dynamic conformational changes upon binding. The enzyme contorts the substrate into its transition state,therebyincreasing the rate of the reaction.

Creating an energy story for the reaction above

Using Figure 6, answer the questions posed in the energy story.
1. What are the reactants? What are the products?
2. What workwas accomplishedby the enzyme?
3. What state is the energy in initially? What state is the energy transformed into in the final state? This one might be tricky still, but try to identify where the energy is in the initial state and the final state.

Enzyme regulation

Why regulate enzymes?

Cellular needs and conditions vary from cell to cell and change within individual cellsover time. The required enzymes and energetic demands of stomach cellsare differentfrom those of fat storage cells, skin cells, blood cells, and nerve cells.Furthermore, adigestive cell works much harder to process and break down nutrients during the time closely following a meal compared with many hours after a meal. As these cellular demands and conditions vary, so do the needed amounts and functionality of different enzymes.

Regulation of enzymes by molecules

Enzymes can be regulatedin ways that either promote or reduce their activity. There are many kinds of molecules that inhibit or promote enzyme function, and various mechanisms exist for doing so.In some casesof enzyme inhibition, for example, an inhibitor molecule is similar enough to a substrate that it can bind to the active site andsimplyblock the substrate from binding. When this happens,the enzyme is inhibitedthrough competitive inhibition, because an inhibitor molecule competes with the substrate for active site binding.On the other hand, innoncompetitive inhibition, an inhibitor molecule binds to the enzyme in a location other than an active site and stillmanages to blocksubstrate binding to the active site.

Figure 7. Competitive and noncompetitive inhibition affect the rate of reaction differently. Competitive inhibitors affect the initial rate but do not affect the maximal rate, whereas noncompetitive inhibitors affect the maximal rate.

Some inhibitor molecules bind to enzymes in a location where their binding induces a conformational change that reduces the affinity of the enzyme for its substrate. Thistype ofinhibitionis calledallosteric inhibition.Mostallostericallyregulated enzymes are madeup ofmore thanone polypeptide, meaning that they havemore thanone protein subunit. When an allosteric inhibitor binds to an enzyme,all active sites on the protein subunits are changed slightlysuch that they bind their substrates with less efficiency. There are allosteric activatorsas well asinhibitors. Allosteric activators bind to locations on an enzyme away from the active site, inducing a conformational change that increases the affinity of the enzyme’s active site(s) for its substrate(s).

Figure 8. Allosteric inhibitorsmodifythe active site of the enzyme so that substrate bindingis reducedor prevented. In contrast, allosteric activatorsmodifythe active site of the enzyme so that the affinity for the substrate increases.

Video link

Check out this short (one-minute) video on competitive vs. noncompetitive enzymatic inhibition. Also,take alook at this video (1.2 minutes) on feedback inhibition.

Many enzymes don’t work optimally, or even at all, unless bound to other specific non-proteinhelpermolecules, either temporarily throughionicor hydrogen bonds or permanently through stronger covalent bonds. Two types of helper molecules are cofactors and coenzymes. Binding to these molecules promotes optimal conformation and function for their respective enzymes. Cofactors are inorganic ions such as iron(II)(Fe²⁺) and magnesium(II)(Mg²⁺). One example of an enzyme that requires a metal ion as a cofactor is the enzyme that builds DNA molecules, DNA polymerase, which requires a bound zinc(II)ion (Zn²⁺) to function. Coenzymes are organic helper molecules, with a basic atomic structure made up of carbon andhydrogen,thatare requiredfor enzyme action. The most common sources of coenzymes are dietary vitamins. Some vitamins are precursors to coenzymes, and others act directly as coenzymes. Vitamin C is a coenzyme for multiple enzymes that take part in building the important connective tissue component, collagen. An important step in the breakdown of glucose to yield energy iscatalysis bya multi-enzyme complex called pyruvate dehydrogenase. Pyruvate dehydrogenase is a complex of several enzymes thatactuallyrequires one cofactor (a magnesium ion) and five different organic coenzymes tocatalyzeits specific chemical reaction. Therefore, enzyme function is, in part, regulated by an abundance of various cofactors and coenzymes, whichare suppliedprimarily by the diets of most organisms.

Enzyme compartmentalization

In eukaryotic cells, molecules such as enzymesare usually compartmentalizedinto different organelles. This allows for yet another level of regulation of enzyme activity. Enzymes required only for certain cellular processes canbe housedseparately along with their substrates, allowing for more efficient chemical reactions. Examples of thissort ofenzyme regulation based on location and proximity include the enzymes involved in the latter stages of cellular respiration, which take placeexclusivelyin the mitochondria, and the enzymes involved in the digestion of cellular debris and foreign materials,locatedwithin lysosomes.

Possible NB Discussion Point: Reversing the Effects of Caffeine

Previously, we discussed caffeine and its metabolism. Let’s now think about caffeine’s pharmacology (mode of action). Were you able to identify, compare, and contrast the molecule that caffeine had a similar structure to? Because of caffeine's structural similarity to the molecule adenosine, it is actually able to bind to the adenosine-specific receptor protein in the brain. However, because the exact lock-and-key-fit is unsatisfied, caffeine will not "activate" the adenosine receptors upon binding as adenosine would. Normally, when adenosine binds to and thereby activates its specific receptor protein in the brain, the physiological effect is increased drowsiness and muscle relaxation. It makes sense that we get tired at night because we accumulate adenosine over the day -- that's a lot of receptor activation! But back to caffeine -- when caffeine is present, it can bind to the adenosine receptor protein, thereby blocking adenosine from binding/activating the receptor. The lack of adenosine action is what leads to suppressed sleepiness and increased alertness. The inhibition seen with this receptor protein and caffeine is similar to some of the inhibition we see with enzymes. What type of inhibition would you classify this as? Follow up question: If you were hired by a company to design a solution to reverse the effect of caffeine post-ingestion, what strategies would you try to test? Explain!

Additional links

Khan Academy

The following links will take you to a series of videos on kinetics. The first link contains four videos on reaction rates, and the second link contains nine videos related to the relationship between reaction rates and concentration. These videos are supplemental andare providedto give you an outside resource to further explore enzyme kinetics.